“`html
P80 PF940C Compact Frame Kit: Build-Ready Foundation for Glock-Compatible Pistols
The P80 PF940C Compact Frame Kit provides builders with a serialized, unfinished polymer frame compatible with Glock Gen 3 components. Designed for those who prioritize hands-on customization, this jig-free kit ships with all necessary frame parts except the slide and barrel. Over 370 units sold confirm its status as a proven starting point for compact builds. Ideal for range use or tactical applications where modularity matters.
Key Specifications
- Compatibility: Glock 19/23/32 Gen 3 (compact models)
- Material: Reinforced polymer with steel locking block
- Includes: Frame, rails, pins, trigger housing
- Finish: Unmilled – requires final drilling per ATF guidelines
- Weight: 8.2 oz (frame only)
Build Flexibility
The PF940C’s open architecture accommodates aftermarket triggers, slides, and magazine releases without proprietary restrictions. Unlike factory frames, the undercut trigger guard and enhanced grip texture improve control during rapid fire. Builders report easier holster compatibility compared to non-standard frame designs.
Pre-drilled pin holes and indexed rail slots reduce alignment errors during assembly. The frame’s polymer composition accepts standard stippling tools for personalized grip patterns. Forward accessory rails maintain compatibility with tactical lights and lasers common in duty setups.
Serialization occurs post-manufacturing to comply with federal requirements. The unfinished state allows builders to complete final drilling according to their preferred method. This process typically requires basic workshop tools and takes under two hours for experienced users.
Note that completed firearms must meet overall length requirements to avoid NFA classification. The compact frame maintains standard magazine capacity when paired with OEM Glock mags or reputable aftermarket equivalents.
Compatibility Notes
- Slides: Works with Gen 3 Glock 19 slides; some aftermarket slides may require fitting
- Magazines: Accepts all Gen 1-5 Glock 19/23/32 mags
- Triggers: Compatible with most drop-in systems for Gen 3 platforms
- Does not support ambidextrous slide releases without modification
Installation Overview
Assembly requires drilling three frame holes and installing included rails with provided hardware. The process involves:
- Securing frame in a vise with protective padding
- Drilling pin holes using a 3mm bit (not included)
- Installing rear rail module with locking block
- Fitting slide components after frame completion
Frequently Asked Questions
Q: Does this include a parts kit?
A: The frame ships with rails, pins, and trigger housing only. Slides, barrels, and internal components must be sourced separately.
Q: What tools are needed?
A: Minimum requirements include a drill, 3mm bit, hammer, and punch set. A rotary tool helps clean polymer flashing.
Q: Is this California compliant?
A: Builders must verify compliance with state laws before purchase. Some jurisdictions prohibit unserialized frames.
Q: How does this compare to OEM frames?
A: The PF940C offers deeper grip texture and modular design at the cost of requiring final machining.
Q: Can I use Gen 4/5 slides?
A: Only with aftermarket adapters. Gen 3 components provide the most direct compatibility.
Warranty & Shipping
All frames include a limited lifetime warranty against manufacturing defects. Shipping to prohibited jurisdictions is automatically canceled. Builders assume responsibility for complying with 18 USC § 922(a)(6) regarding firearm construction.
“`nn
